 |
We are
selling you the complete set.
TDS-2 (2 Axis
Mill/Lathe DRO) with 2 Precision Glass Scale with protective cover and all
the necessary mounting accessories.
Everything is
included, so you do not need to hunt down anything from your hardware store
!! |
|
 |
This
TDS-2 DRO is specially caters for USA,
as the
display in inches is
4 decimal places.
e.g. the display will show (4 decimal places) "0.1234 inch"
---It
also display in MM, with 3 decimal places.
It uses an advanced interference-protected universal power supply.
It accept 80 Vac - 240Vac |
|
 |
High Quality Precision Glass
Linear Scale Each individual Scale
are checked by Laser during production to ensure they meet the industry
standard.
They also comes with their corresponding
coolant protective cover |
|
 |
Our TDS Scales comes with
Double-Layer Rubber Sealing lips for double the protection against coolant
and chips. (E.g. SINO scales only
has Single-Layer Rubber Sealing, so their life spans are greatly shorten)
How we know ? Because we install DRO system and linear scale everyday for
our customer.
We are unlike other "Traders Only" Seller, whom, will not be able to give
you the correct advice and only provide you with the cheapest.
We
choose the BEST, so you Worry LESS !!
|
|
 |
Scale installation manual in
English. Showing the method to
install the Precision Glass Linear Scale. |
|
 |
Complete sets of screws, washer and spring washer.
We make sure you have
enough. Even enough for you to drop a few screws and make them disappear.
(You know what I am talking about... It always happen and it alway
seems that the floor has eaten them.)
We do not want you
to waste time to search for missing screws. We want you to have an easy and
carefree installation.
I believe you are
happy with our thinking !! |
|
 |
Shim plates for adjusting the scales alignment and
thickness
This is critical
for getting the correct alignment, and we make sure you have these with
different sizing, so it match any alignment problem.
Do our competitors
offer them ?? It sets you thinking !! |
|
 |
2x Mounting blocks
For easy installation on uneven surface...
Most of the time the Y-axis on the Milling machine will not be smooth.
So either, you make
one yourself, or you buy from TheDROStore, whom had already prepare them for
you.
A little thoughts goes
a long way !! |
|
 |
Cables
need to be tidy, that's why we are providing you with cable clips and cable
tie to manage the cables,
It must be tidy and
not hook on to something and break the cable.
No bother to check with our competitors anymore... we give you best value
and ease the pain of installing the DRO system.
We can see you
smiling from miles away now !! Cheers ! |
|
 |
4x solid pieces of mounting bracket with
the slots and screw holes tapped.
You need these to get
the correct mounting position of the Reader Head (Sensor Head).
I saw some seller in eBay provide only 1
piece of bracket. I can only say good luck to their buyer, and hope their
machine is mould to suit their 1 piece of bracket.
You get good quality
and good service, plus our in-depth knowledge of DRO installation !! |
|
 |
See what you can do with 4 brackets.
It allows you to
mount, even in difficult conditions. |
List of items:
1) DRO (1 set)
- TDS-2
- Protective
Cover
- Power Cable
- Mounting
Arm and screws
-
English Operation Manual
2) Precision Glass Scales (2 set)
- Choose the preferred travel length:
Metric: 50, 120, 170, 220, 270, 320, 370,
420, 470, 520, 620, 750, 820, 920mm.
Inches: 2, 4.7, 6.7, 8.7, 10.6, 12.6,
14.6, 16.5, 18.5, 20.5, 24.5, 29.5, 32.3, 36.2inches.
We also make scales up to
120inch.
(Physical
Length/Overall Length is 142 mm (5.6") longer)
You can CHOOSE ANY 2 PIECE OF GLASS SCALE FROM THE ABOVE.
To know what
travel length scale will suits yout machine, you can visit my blog:
http://mtechdro.blogspot.com/2007/08/faq-what-scale-length-will-suit-my.html
Here are
some common scales for these standard machine:
| Mill Size |
Scale Travel |
Scale Overall Length |
| 8 x 36" |
12.6 x 30" |
18 x 35" |
| 9 x 42" |
14.6 x 30" |
20 x 35" |
| 9 x 49" |
14.6 x 36" |
20 x 41.8" |
| 10 x 54" |
16.5 x 40" |
22 x 45.6" |
| Lathe Size |
Scale Travel |
Scale Overall Length |
| 12 x 24" |
6.7 x 30" |
12 x 35" |
| 12 x 36" |
8.7 x 40" |
14 x 45.6" |
| 13 x 40" |
8.7 x 40" |
14 x 45.6" |
| 14 x 40" |
10.6 x 40" |
16 x 45.6" |
| 16 x 40" |
10.6 x 40" |
16 x 45.6" |
| 16 x 60" |
10.6 x 60" |
16 x 65.6" |
| 18 x 60" |
12.6 x 60" |
18 x 65.6" |
- 4 pieces of mounting bracket (unlike
some other seller, whom only provide 1 mounting bracket and require you to make
the rest)
- Protective cover
- 2xMounting blocks (for easy installation
on uneven surface)
- Shim plates for adjusting the scales alignment and thickness
- Cable clips and lots of mounting screws
- Scale installation manual
Technical Information:
-TDS-2 Features
~On Board Calculator
~Absolute/Incremental
~M/I: MM/Inches conversion
~Radius/ Diameter display via parameter
setting
~200 work piece zero position memory
~1/2 function, Part Centering
~PCD, Bolt hole circle
~Drilling hole in a oblique line
~Angular surface processing
~Linear error compensation function
~Rounding "R" function
~Power off memory
Linear Precision Glass Scales Features
~High Precision Etched glass
~Resolution : 5um (0.005mm).0002 inch
~Signal : TTL SQUARE WAVE
~Grating pitch: 0.02mm (50LP/min)
~Accuracy: ±0.005 mm or 0.0002" (at 20 deg C)
~Reference marks at interval of 50mm
~Response Speed: 60m/min or 40ins/sec
~Cable length: Armoured 3 Meter (about 9 feet)
THESE ARE HIGH QUALITY SCALES THAT HAVE BEEN CHECKED BY LASER !!!
Drawing of the Scales:
Slim
Scales (Model JCXF ) - Normally used for Lathe Cross-slide ( measure up to
370mm, 14.5")
Standard Scales (Model JCXE) - Used for Z-axis on Lathe and Milling machine
( measure up to 1020mm, 40.1")
Long Scales (Model JCXG) - Used for Big machine with extended length (
measure up to 6000mm, 236")
Warranty:-
~ 1 year
international warranty
Payment:-
~ Paypal is preferred.
~ Credit cards through Paypal.
~ Bank transfer
~ Telegraphic Transfer/Remittances
Delivery:-
~Door-to-Door By Air Parcel FEDEX
Shipping -FREE
~Shipping for
USA, CANADA, UK, AUSTRALIA, NEW ZEALAND
is FREE
US$125
( 9
to 11 Days)
~For Other location, please email me for shipping/handling cost.
OPTIONAL:
Why wait 9~14 working
days ? You can have your DRO fly to you in
2~5 working days. Get your DRO
faster,
with point-to-point tracking and hassle-free clearance.
JUST ADD USD20.
FREE ONLY for THIS Promotion !!!
Other countries, please email to check for
charges.
-----------------------------------------------------------------------------------
We are
so SURE you will like it
and improve your work efficiency and accuracy that we gladly
offer you 30 days NO QUESTIONS ASKED
return privilege.
This is a 100% refund. You are only responsible for shipping back the
package.
11.
Sample Photos of mTECH DRO installation (Click
to see more photos at my Blog)
12. WHAT
OTHER BUYER SAYS ABOUT US:
Buyer : Charles Smyder (USA)
(Click
to see his DRO installation in the blog)
"
the free E-book was invaluable for mounting hints and especially noteworthy for
the proper scale alignment proceedures. The trouble free, neat & tidy
installation was due wholly to the the extra thought that you put into creating
the complete DRO package. Just as your ad stated, there was nothing else to
buy "
Buyer: efatec (130) (Germany)
"Superschnell
und super Ware. Vielen Dank und immer gern wieder."
Buyer: floritasonia
( 57 ) (Italy)
"Ok ottimo molto veloce.Porodotto di qualità."
Buyer: toch185
(
16)
(Swiss)
"shipment very very fast , thaks a lot"
Buyer: protman16 ( 18 ) (CANADA)
"Excellent communication, very fast shipping
and great customer service!!!"
For more
information and machine installation example of our customer,
you can check it out:
The Number #1 blog
for DRO installation example
http://mtechdro.blogspot.com/
RETURN POLICY
=============
We are so SURE you will like it and improve your work efficiency and accuracy
that we gladly offer you 30 days NO QUESTIONS ASKED return privilege.
This is a 100% refund
You are ONLY responsible for the Packaging and Shipping costs.
CHECKOUT INSTRUCTION
====================
Please advice:
1) What is the measuring length of the scales?
2) Your shipping address
3) Your phone no.
After you purchase we will email you to
ask for your required scale length before shipping.
We believe in personal touch to give you peace of mind.
<< Back to Main
|
|
|
